10kV电力变压器 SBH15-M系列

4-.jpg



产品简介
Brief introduction to the products

SBH15系列产 品为非晶合金铁芯配电变压器,是划时代的技术、跨世纪的“绿色”产品,该系列产品于 2016 年 4 月通过 了国家电器产品质量监督检验中心的全部型式试验及短路承受能力试验。其性能符合 GB1094 《电力变压器》 和 GB/ T25446-2010 《油浸式 非晶合金铁芯配电变压器技术参数和要求》 标准。与S11系列相比,空载损 耗及空载电流平均下降约65%左右,是名副 其实的超低损耗产品。该系列 产品结构先进合理,抗短路能力强,总体性 能水平达到世界先进水平。

SBH15 series of products for the amorphous alloy core distribution transformers, is epoch-making technology, the cross-century "green" products, the series in April 2016 by the National Electrical Product Quality Supervision and Inspection Center of all types of short-circuit test and bear Capacity test. Its performance in line with GB1094 "Power Transformer" and GB / T25446-2010 "oil-immersed amorphous alloy core distribution transformer technical parameters and requirements" standard. Compared with the S11 series, no-load loss and no-load current average decreased by about 65%, is a veritable ultra-low loss products. The product structure of advanced and reasonable, short-circuit-resistant ability, the overall performance level reached the world advanced level.

主要结构及特点
The Main Structure and Characteristics

铁芯采 用三相五柱式卷铁芯,铁芯选 用非晶合金材料,铁基非 晶合金具有高饱和磁感应强度、低损耗、低矫顽力、低激磁电流、良好的 温度稳定性等特点。这种材 料采用急冷凝固生产工艺,其物理 状态表现为金属原子呈无序非晶体排列,它与硅钢片完全不同,更有利 于被磁化和去磁。这种新 材料用于变压器铁芯,当变压器运行时每秒 100-120 次的去 磁和被磁化过程相当容易,从而大 幅度降低了铁芯的空载损耗,与传统 硅钢片式铁芯的油浸变压器相比还可以减排 CO2、SO2、NOX 等有害气体,被称为二十一世纪的“绿色产品”。线圈选 用优质无氧铜绕制成矩形结构。低压采用铜箔绕制,箔式线 圈是以不同厚度的铜箔带为导体,以宽带 状的绝缘材料为层间绝缘,以窄带 状的绝缘材料为端绝缘,在箔式 绕线机上一次完成卷绕,同时完 成线圈内外侧引线的焊接。箔式低 压线圈克服了矩形线圈抗短路能力差的特点,大大提 高了线圈的机械强度;高压线 圈采用高压自动绕线机完成,该绕制 方式自动化程度高、动力强劲,可自动 排线及气动线架涨拉,为线圈 绕制的轴向紧密度和辐向紧实度提供保证。我公司 的非晶合金铁芯变压器器身装配工艺采用自动装配台,打破传 统的器身装配方法,将绕组 预先放置在装配台的升降平台上,绕组的轴线呈水平状,各单框 铁芯横向穿入绕组内孔,确保器 身装配过程中的金属碎片不掉入线圈内。变压器 油箱为波纹式结构,波纹材 料为优质冷轧板,采用氩弧焊接,波纹与油箱采用 CO2气体保护焊接,焊接电流稳定,焊缝熔深大,成型好无缺陷等特点。该结构 在变压器工作时,除具备 良好的散热性能外,波纹片 的波翅还具有膨胀并可缓解内部压力上升的功能;变压器 器身采用变压法真空干燥方式,干燥彻底,绝缘性能高。总装过 程采用全真空注油,使器身 及各处绝缘充分浸油,无气泡,整体绝缘强度增强。变压器 取消了传统的储油柜,采用管式油位计,或多功能保护器,该结构可显示油位,压力释 放及瓦斯报警功能,缩小了变压器体积,使变压 器运行维护更加方便、快捷。

The iron core uses three-phase five-column roll core, iron core uses amorphous alloy material, Fe-based amorphous alloy has characteristics of high saturation magnetic induction intensity, low loss, low coercive force, low exciting current, good temperature stability . This material is produced by rapid solidification process, the physical state of the metal atoms were disordered amorphous arrangement, it is completely different with the silicon steel, more conducive to be magnetized and demagnetized. This new material for the transformer core, when the transformer is running 100-120 times per second to the demagnetization and magnetization process is quite easy, thus significantly reducing the core of the no-load loss, and the traditional silicon steel core Oil-immersed transformers can also reduce emissions of CO2, SO2, NOX and other harmful gases, known as the twenty-first century "green products." High-quality oxygen-free copper coil is made of rectangular structure. Low-voltage copper foil around the system, foil coil is a different thickness of the copper foil as a conductor to broadband insulation for the interlayer insulation, narrow-band insulation for the insulation, the foil winding machine on a complete Winding, while completing the inside and outside the coil lead wire welding. The high-voltage coil adopts the high-voltage automatic winding machine to complete, the high-degree of automation of the winding system, strong power, can be automatically arranged and pneumatic wire-line coil Wire frame pull up for the coil winding system of axial tightness and tightness to provide assurance. My company's amorphous alloy core transformer assembly process using automatic assembly units, breaking the traditional body assembly method, the winding pre-placed in the assembly platform of the lifting platform, the axis of the winding was horizontal, the single-frame core Lateral penetration into the winding hole, to ensure that the body assembly process of metal debris does not fall into the coil. Transformer tank for the corrugated structure, corrugated material for high-quality cold-rolled plate, the use of argon welding, corrugated and the tank with CO2 gas protection welding, welding current stability, weld penetration depth, forming a good defect-free features. The structure of the transformer in the work, in addition to have good heat dissipation, the corrugated pieces of the wings also have expansion and can relieve internal pressure rise function; transformer body vacuum pressure drying method, dry, high insulation performance. The whole process of vacuum filling oil filling, so that the body and the insulation of the full immersion oil, no bubbles, the overall insulation strength. Transformer eliminates the traditional oil conservator, the use of tubular oil level gauge, or multi-function protector, the structure can display the oil level, pressure relief and gas alarm function, reducing the transformer size, the transformer operation and maintenance more convenient and fast.


技术参数
Product Structure

未标题-6.jpg


    友情链接:    创盈彩票网   e时彩_安全购彩   大地彩票   王者彩票_安全购彩   e时彩